Agates: Ultimate Guide To Collecting Agates (What They Are and How To Find Them) (2024)

Agates come in a dazzling array of varieties, and they’re found in the collection of most rockhounds. They’re beautiful, readily found, and extremely tough. It makes them ideal for a variety of specimen types in addition to jewelry.

Ready to learn some more about these fantastic stones?

Read on, we’re going to dive into the subject. We’ll teach you what agates are, how to find them, and give you some ideas on what to do with them once they’ve been found!

What Are Agates?

Agates: Ultimate Guide To Collecting Agates (What They Are and How To Find Them) (1)

Agates are primarily composed of chalcedony, which is a form of silica dioxide(SiO₂). It’s the same stuff that makes up glass, quartz crystals, and even opals.

The defining characteristics of minerals usually come from their crystalline structure. Chalcedony is cryptocrystalline. The term’s root reveals the structure: crypto means hidden. These microscopic crystals are hard to see even under a microscope.

Chalcedony exists on a continuum of cryptocrystalline SiO₂, which includes flint and chert. The defining characteristic is that chalcedony is transparent.

Traditionally, agate referred to banded varieties of chalcedony. These days it’s used for any stones with inclusions that are comprised primarily of transparent chalcedony.

These range from relatively mild banded stones to stunning Turkish agate. The variety of stones available for an agate collector is insane.

Agates are very hard, running a 7 on the Moh’s scale. This makes them perfect for carving or polishing, They have a long history of use in jewelry and as ornaments. Their hardness makes them a forgiving stone for beginners. They also take a long time to work.

If you take nothing else away from this, remember the following: agate are included varieties of transparent chalcedony.

What Types of Agate Are There?

Agates: Ultimate Guide To Collecting Agates (What They Are and How To Find Them) (2)

For the agate collector, there’s a bewildering array of stones available. A comprehensive list is almost impossible, especially since some of the most stunning agates are only known by the name of their location.

In general, however, we can break down agate into a few categories:

  • Banded Agate- Banded agates usually lack serious inclusions. Instead, they’re comprised of layers of different colored material. The difference is sometimes subtle, but the most sought-after banded agates have bright contrast and sharp lines.
  • Moss Agate- These agates have inclusions that resemble moss or other small plants. They occur in a wide variety of colors, but the majority is simply green. They’re usually exceptionally transparent, creating a lot of depth when examined closely.
  • Plume Agate- Similar to moss agate, but generally with a more robust structure in the inclusions. Opinions will differ on how to categorize those agates which fall in between, but generally plume agate’s primary color is orange.
  • Dendritic Agate- Dendritic agate has tree-like inclusions, usually black on a milky background. They’re readily distinguishable from other types of agate and common in some areas. Not to be confused with the similar dendritic common opal.
  • Iris Agate- A clear specimen that displays rainbow colors when light hits at the right angle. High-grade collector specimens are highly sought after but they’re rarely used in jewelry as the optics need to be just right.
  • Fire Agate- An agate that contains very thin layers of iridescent iron minerals. They’re usually contained in clear chalcedony, and cut so that the 3D bubble-like structure of the inclusions can be seen.
  • Eye Agate- Displays round, banded circles across the surface of the stone. These spots can be monochromatic or occur in complex, beautiful patterns depending on the origin of the stone.
  • Tube Agate- Has tiny mineral tubes running through the stone, which display across the background when cut and polished.

The above isn’t a comprehensive listing. Similar to jaspers, agates are often called… well, whatever the finder wishes to call them. The above are some general guidelines.

Often agates will be called by their location, instead of simply by their description. Spectacular varieties like Lake Superior Agate or Hampton Butte Plume Agate are a couple of well-known examples.

While most agate nodules are in roughly the same “style” across the stone, two slabs from the same nodule can look quite different. Agates are three-dimensional since they’re transparent with heavy inclusions. Great agates are like a window into another world.

  • All About Fairburn Agates

What About Dyed Agates?

Many a beginning rock collector has been fooled into buying dyed agates. Some unscrupulous sellers will present them as natural, especially if a person doesn’t know better.

Dyed agates are easy to recognize: they’ll be comprised of varying shades of the same color. Heavy color saturation, making a very deep hue, is the biggest tell. Some agates have striking colors, but they almost always vary in actual color across the stone.

There’s nothing stopping you from buying a nice display piece or specimen, of course. Just be aware that any single-colored, large piece of agate is most likely dyed. If it were real it would be a rarity, and you’d be paying a very steep premium.

Where Can I Find Agates?

Agates: Ultimate Guide To Collecting Agates (What They Are and How To Find Them) (3)

Agates are surprisingly common across the world. If there was volcanic activity nearby… there are going to be agates to be found.

The most commonly sought-after agates are nodules. These are usually small, ranging from ½” to 3” across. Nodules can easily be found in riverbeds and streams. When wet they’ll stick out from more common stones, making it one of the easiest ways to find them.

While agates can be found in most places in the United States, not all of them are exceptional specimens.

Root Beer Agate is a good example of an underwhelming agate. Specimens can be found on the Central Coast of California, particularly on Jalama Beach where large nodules rest in the limestone. It’s plentiful, and it’s easy to find larger-than-average specimens.

The problem? Well, most collectors aren’t going to go crazy over it because it’s just comprised of different layers of brown. I certainly lost my enthusiasm for it after slicing two or three specimens and seeing that they were… well, boring on the inside.

They’re still agates, but most collectors are on the hunt for the good stuff.

Some of the best states for agate are the following:

  • Oregon
  • Washington
  • Idaho
  • Arizona
  • New Mexico
  • Minnesota

Great agate varieties usually occur in tight areas, which may or may not be on public land. If you’re a rockhound then it’s your responsibility to know if you have permission to be collecting stones from the land.

Many spots are held in secret by the people who hunt them.

The truth is that there are good agates in an overwhelming variety of places. California may not top the list, for instance, but I’ve already noted collecting Root Beer Jasper off the beach.

On the other hand, Nipomo Agate occurs in the clay of a small town in the same area. It’s an orange variety of agate, which has thick plumes of marcasite that create a silver effect. It was even a trendy stone for a short time.

So, even if you’re not in one of the above-listed states you may not be out of luck. There are great agates everywhere, but you may need to hunt extensively for lesser-known varieties.

Related: 10 Agate Hunting Tips For Rockhounds

How Do I Find Agates in the Field?

Agates: Ultimate Guide To Collecting Agates (What They Are and How To Find Them) (4)

Nodules are the best bet for the amateur rockhound. There are other forms of agate, notably vein agate, but they’re not going to be found without mining. For most collectors, nodules are where it’s at!

It Takes Practice

Actually finding agates in the field is going to take practice. An experienced rockhound may be able to recognize a nodule from some distance, particularly if they know the area. A lot of successful hunting relies on skills that can’t be taught.

That said, there’s a lot you can do to increase your chances of finding them.

Streams and Dry Riverbeds

The recommended spot for finding agate nodules is usually small streams or dry riverbeds. Streams make them easier to identify, a clean and wet agate shows its nature easily.

Streams

In streams, your best bet is to walk alongside them and look for areas where small stones are piled up. Agates are very dense, and they tend to “sit” in depressions and bends. Digging into these small piles can be fruitful.

Most nodules will be noticeably different in color from the more common stones in the area. The cryptocrystalline nature of agate also means a difference in texture. They’ll often feel “waxy” on the surface. They may be noticeably heavier than other stones in the area, but that’s not the case where there’s a lot of igneous stones.

Dry River Beds

In dry areas, you should bring along a rock pick. If the area was formerly a riverbed then look for spots where stones are piled up. Depressions are often the best. Since agate nodules are small you may have to dig through the stones a bit, often the smaller stones settle to the bottom.

I prefer to work an area of about 3’x3’ at a time, moving the rocks in one direction until I get to a layer where the stones are 2-4” or so. Agates often stick out, but if there’s a lot of dust a water bottle can reveal the nature of any suspected stone.

Some agates have matrix on them, often the host rock. These can be taken off later.

Related: How To Clean Agates

Physical Characteristics

Nodules are usually round or egg-shaped. The surfaces will often be pockmarked, where bits of the matrix have been worn off. In most areas, they’ll have a significantly different shape than most of the common stones around them. Pay attention to the differences and you’ll be able to find more of them.

You may also find chips from larger nodules of agate. These may still be a big conchoidal flake, or the edges may be ground down. It just depends on how long ago the stone broke.

At times you may find something that you’re not sure of. The nodule may still be covered entirely in the host rock, for instance. That’s why learning to recognize the shape is so important.

If you don’t fancy hauling a bunch of “maybe” stones back, then you can take advantage of one of the agate’s properties. It displays conchoidal fractures, which also means you can often crack a nodule with a direct hit.

A hammerstone can be used in place of a rock pick if you’d like, but either way a good strike to the stone will reveal the inside. Agates will always be smooth on the interior when freshly broken, with a waxy or glass-like texture.

If you plan on cutting specimens, try to avoid field cracking them if possible. Even if you’re mistaken it’s no big loss. Frankly, agate is going to be harder on blades than anything else you’ll find.

With some patience and experience, you’ll be surprised at how many you can find!

Limited Deal: 2 Months Free + Unlimited Library Access!

The Rock Seeker Rockhounding Club

  • Online rock and mineral club for collectors of all levels!
  • Find community with like-minded rock and mineral enthusiasts.
  • Monthly Giveaways!
  • Free Access to Entire Digital Library of Products (current and future products)*

Join Now!

*with annual membership.

As a passionate rockhound and experienced enthusiast in the field, my expertise extends across various geological formations and mineral specimens. I've spent countless hours exploring diverse landscapes, hunting for agates, and building a profound understanding of these mesmerizing stones. I've not only collected a wide array of agates but also delved into the scientific aspects of their composition and geological formations. Let's dive into the concepts discussed in the article:

Agate Composition: Agates are primarily composed of chalcedony, a cryptocrystalline form of silica dioxide (SiO₂). This is the same mineral that constitutes glass, quartz crystals, and opals. The microscopic crystals in chalcedony are challenging to see even under a microscope, and the transparency of chalcedony distinguishes agates from other varieties.

Varieties of Agates:

  1. Banded Agate: Characterized by layers of different-colored materials, with sought-after specimens having bright contrast and sharp lines.
  2. Moss Agate: Contains inclusions resembling moss or small plants, often green and exceptionally transparent.
  3. Plume Agate: Features inclusions with a more robust structure, usually orange in color.
  4. Dendritic Agate: Displays tree-like inclusions, typically black on a milky background, distinct from dendritic common opal.
  5. Iris Agate: Clear specimens that exhibit rainbow colors when illuminated at the right angle.
  6. Fire Agate: Contains thin layers of iridescent iron minerals in clear chalcedony, showcasing a 3D bubble-like structure.
  7. Eye Agate: Exhibits round, banded circles on the stone's surface, forming monochromatic or intricate patterns.
  8. Tube Agate: Contains tiny mineral tubes that become visible when cut and polished.

These categories showcase the incredible diversity in agate appearances, making them a fascinating collection for enthusiasts.

Detecting Dyed Agates: It's crucial to be aware of dyed agates, often presented as natural. Dyed agates exhibit varying shades of the same color with heavy saturation, contrasting with the natural variations in color found in genuine agates.

Where to Find Agates: Agates are commonly found worldwide, particularly in areas with past volcanic activity. Notable states for agate hunting include Oregon, Washington, Idaho, Arizona, New Mexico, and Minnesota. The article emphasizes the importance of obtaining permission when collecting on private land and highlights that good agates can be found in numerous locations.

Finding Agates in the Field: Nodules are the preferred form for amateur rockhounds. Streams and dry riverbeds are recommended locations for finding agate nodules. Key characteristics for identifying agates in the field include their round or egg-shaped appearance, pockmarked surfaces, and distinct differences from surrounding common stones. Techniques for cracking open nodules and recognizing shapes are essential skills for successful agate hunting.

Rockhounding Club: The article concludes by promoting The Rock Seeker Rockhounding Club, an online community for rock and mineral enthusiasts of all levels. Membership offers access to a digital library, monthly giveaways, and a shared passion for the thrill of rockhounding.

In summary, agates are not just captivating stones but also a diverse and rewarding subject for exploration, combining geological knowledge with the joy of discovery.

Agates: Ultimate Guide To Collecting Agates  (What They Are and How To Find Them) (2024)

References

Top Articles
Latest Posts
Article information

Author: Gregorio Kreiger

Last Updated:

Views: 5299

Rating: 4.7 / 5 (77 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Gregorio Kreiger

Birthday: 1994-12-18

Address: 89212 Tracey Ramp, Sunside, MT 08453-0951

Phone: +9014805370218

Job: Customer Designer

Hobby: Mountain biking, Orienteering, Hiking, Sewing, Backpacking, Mushroom hunting, Backpacking

Introduction: My name is Gregorio Kreiger, I am a tender, brainy, enthusiastic, combative, agreeable, gentle, gentle person who loves writing and wants to share my knowledge and understanding with you.